CowDream GO glue 200 ml
- 200 ml
- 2-component glue
- All-year glue
- Especially suitable for temperatures below 11° celcius
- Extremly fast setting
- Setting within 30 seconds
Product characteristics
CowDream GO hoof glue has been developed especially for KVK and based on KVK’s many years of experience with hoof trimming. Naturally, the hoof glue, like all other KVK products, meets KVK’s values. The hoof glue is of high quality and sets extremely quickly with great reliability of adhesion.
Easy and quick to apply
CowDream GO hoof glue is applied easily and quickly to the animal’s hoof using a CowDream mixing tip.
All-year glue
Especially suitable for temperatures below 11°, but CowDream GO can be used all year round provided that optimal storage takes place at 25° and that the glue should not be stored below 5°.
Fast setting
CowDream GO hoof glue is extremely fast setting. The glue will set within just 30 seconds and within 2-3 minutes the cow will be able to walk on the hoof block. The prerequisite for achieving optimal adhesion is that the hoof is dried thoroughly before the block is applied.
Perfect for all types of hoof blocks
CowDream GO hoof glue is perfect for both wooden and rubber hoof blocks. The use of 2-component hoof glue provides great reliability of adhesion.
We also offer a CowDream glue dispenser and mixing tips for the hoof glue.
Further information
Application of CowDream GO hoof glue
The hoof glue is placed in a dispenser. The plug is removed and the mixing tip is fitted to mix the two components of the glue. Adjust the glue cartridge by holding it straight up and then press the gun handle to remove air before application.
Squeeze out a small amount of glue to ensure that the 2 components of the glue are correctly mixed. The glue is now ready to be applied to the prepared hoof block. Apply the glue and quickly place the block on the clean and dry hoof. We recommend using a hair dryer to dry the hoof.
In less than 30 seconds the glue will set and after 2-3 minutes the hoof can again bear the weight of the animal. The mixing tip should remain on the cartridge and only be replaced when the glue is to be used again.
For the glue to adhere optimally, it is important that the hoof is carefully prepared.
The hoof must be cleaned, dried and trimmed so that it has a rough surface, as this provides better adhesion.
Do not press hard on the hoof block after the glue has been applied, as pressure may cause the glue to be squeezed out between the block and the hoof, which may result in the layer of glue becoming too thin to provide optimal adhesion.
If you want 1 box, please order 12 pcs.
If full pallet, please order 1200 pcs.
